Fish surfboards made of epoxy: the perfect choice for speed and fun
Fish surfboards made of epoxy resin are an excellent choice for surfers who want to enjoy a fast and maneuverable ride. These boards are characterized by their wide, short shape and characteristic swallow tail design, which provides excellent stability and manoeuvrability.
Epoxy fish boards offer some key advantages over traditional PU boards. They are lighter, tougher and more durable, as epoxy resin combined with EPS foam has a higher impact resistance. This makes them particularly suitable for small to medium waves, as they offer excellent buoyancy.
Not in stock
Surfboard RUSTY ACT Moby Fish 7.4 Quad
€929.00*
In 2005 I made my first 4 fin Moby. I really liked the feel of this ride. I had ridden it in surf up to approximately 5 foot. One day I thought the surf was pretty small, so I took my Moby down to Blacks. Nothing else. I was very fortunate to have a key. When I got to the bottom of the road, the surf looked as I thought it would. Pretty small but clean. I put on my wetsuit, pulled the Moby out of the back of my truck, closed the hatch. I looked out at the lineup and did a double take. A solid 6-foot set. Fu#k! Well, it was the only board I had with me, so off I went.My first wave, I was trippen, because I thought I would really have to pull back on the reigns. No. The board took off like a bat out of hell. It had no top end. After a few more waves, I was completely sold on this design and the versatility it had.It’s been very popular, some of my good friends had them. What was interesting, their sons, some of the best LJ reef surfers, tried them and didn’t want to give them back. They ordered duplicates. Not smaller, leaner versions. The same boards. They actually rode them on the bigger days.Because of it’s size, it is a great board for beginners and is a great alternative to a longboard. As it turns out, it’s good for all ranges of ability and surf. The entry rocker is relaxed which helps with the paddle. The exit rocker is on the average plus side which helps with turning and fits into the waves better. The fuller outline provides lots of surface area: glide and speed. The rails are fuller but somewhat angular with a lower apex providing lift and control.I were relegated to one board, this would be it. Fun.Dimensions: 7.4 x 22.5 x 2.99 - 56,6 Liter4 Fin Ouad Setup, fitting Futures FinsContent: Board without finsACT PREPREG CronstructionTorq ACT surfboards are the world's first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin. On any surfboard the resin's function is to hold the fibre in place. It offers little structural integrity of it's own, little flex and little impact strength. As a material without the fibre it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight. With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight. Rusty TQ-ACT-RU-MF-0704
Not in stock
Surfboard RUSTY TEC Moby Fish 7.8 Quad
€925.00*
In 2005 I made my first 4 fin Moby. I really liked the feel of this ride. I had ridden it in surf up to approximately 5 foot. One day I thought the surf was pretty small, so I took my Moby down to Blacks. Nothing else. I was very fortunate to have a key. When I got to the bottom of the road, the surf looked as I thought it would. Pretty small but clean. I put on my wetsuit, pulled the Moby out of the back of my truck, closed the hatch. I looked out at the lineup and did a double take. A solid 6-foot set. Fu#k! Well, it was the only board I had with me, so off I went.My first wave, I was trippen, because I thought I would really have to pull back on the reigns. No. The board took off like a bat out of hell. It had no top end. After a few more waves, I was completely sold on this design and the versatility it had.It’s been very popular, some of my good friends had them. What was interesting, their sons, some of the best LJ reef surfers, tried them and didn’t want to give them back. They ordered duplicates. Not smaller, leaner versions. The same boards. They actually rode them on the bigger days.Because of it’s size, it is a great board for beginners and is a great alternative to a longboard. As it turns out, it’s good for all ranges of ability and surf. The entry rocker is relaxed which helps with the paddle. The exit rocker is on the average plus side which helps with turning and fits into the waves better. The fuller outline provides lots of surface area: glide and speed. The rails are fuller but somewhat angular with a lower apex providing lift and control.I were relegated to one board, this would be it. Fun.Dimensions: 7.8 x 23 x 3.31 - 67,2 Liter4 Fin Ouad Setup, fitting Futures FinsContent: Board without finsTEC - TORQ EPOXY COMPOSITETorq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.The result is light but very strong board, with good flex characteristics and as with all torq's excellent value. Rusty TQ-TC-RU-MF-0708
2 available
Surfboard RUSTY ACT Moby Fish 6.8 Quad
€889.00*
In 2005 I made my first 4 fin Moby. I really liked the feel of this ride. I had ridden it in surf up to approximately 5 foot. One day I thought the surf was pretty small, so I took my Moby down to Blacks. Nothing else. I was very fortunate to have a key. When I got to the bottom of the road, the surf looked as I thought it would. Pretty small but clean. I put on my wetsuit, pulled the Moby out of the back of my truck, closed the hatch. I looked out at the lineup and did a double take. A solid 6-foot set. Fu#k! Well, it was the only board I had with me, so off I went.My first wave, I was trippen, because I thought I would really have to pull back on the reigns. No. The board took off like a bat out of hell. It had no top end. After a few more waves, I was completely sold on this design and the versatility it had.It’s been very popular, some of my good friends had them. What was interesting, their sons, some of the best LJ reef surfers, tried them and didn’t want to give them back. They ordered duplicates. Not smaller, leaner versions. The same boards. They actually rode them on the bigger days.Because of it’s size, it is a great board for beginners and is a great alternative to a longboard. As it turns out, it’s good for all ranges of ability and surf. The entry rocker is relaxed which helps with the paddle. The exit rocker is on the average plus side which helps with turning and fits into the waves better. The fuller outline provides lots of surface area: glide and speed. The rails are fuller but somewhat angular with a lower apex providing lift and control.I were relegated to one board, this would be it. Fun.Dimensions: 6.8 x 21,38 x 2.59 - 42,4 Liter4 Fin Ouad Setup, fitting Futures FinsContent: Board without finsACT PREPREG CronstructionTorq ACT surfboards are the world's first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin. On any surfboard the resin's function is to hold the fibre in place. It offers little structural integrity of it's own, little flex and little impact strength. As a material without the fibre it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight. With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight. Rusty TQ-ACT-RU-MF-0608
Not in stock
Surfboard RUSTY TEC Moby Fish 7.4 Quad
€885.00*
In 2005 I made my first 4 fin Moby. I really liked the feel of this ride. I had ridden it in surf up to approximately 5 foot. One day I thought the surf was pretty small, so I took my Moby down to Blacks. Nothing else. I was very fortunate to have a key. When I got to the bottom of the road, the surf looked as I thought it would. Pretty small but clean. I put on my wetsuit, pulled the Moby out of the back of my truck, closed the hatch. I looked out at the lineup and did a double take. A solid 6-foot set. Fu#k! Well, it was the only board I had with me, so off I went.My first wave, I was trippen, because I thought I would really have to pull back on the reigns. No. The board took off like a bat out of hell. It had no top end. After a few more waves, I was completely sold on this design and the versatility it had.It’s been very popular, some of my good friends had them. What was interesting, their sons, some of the best LJ reef surfers, tried them and didn’t want to give them back. They ordered duplicates. Not smaller, leaner versions. The same boards. They actually rode them on the bigger days.Because of it’s size, it is a great board for beginners and is a great alternative to a longboard. As it turns out, it’s good for all ranges of ability and surf. The entry rocker is relaxed which helps with the paddle. The exit rocker is on the average plus side which helps with turning and fits into the waves better. The fuller outline provides lots of surface area: glide and speed. The rails are fuller but somewhat angular with a lower apex providing lift and control.I were relegated to one board, this would be it. Fun.Dimensions: 7.4 x 22.5 x 2.99 - 56,6 Liter4 Fin Ouad Setup, fitting Futures FinsContent: Board without finsTEC - TORQ EPOXY COMPOSITETorq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.The result is light but very strong board, with good flex characteristics and as with all torq's excellent value. Rusty TQ-TC-RU-MF-0704
Not in stock
Surfboard RUSTY TEC Moby Fish 7.0 Quad
€869.00*
In 2005 I made my first 4 fin Moby. I really liked the feel of this ride. I had ridden it in surf up to approximately 5 foot. One day I thought the surf was pretty small, so I took my Moby down to Blacks. Nothing else. I was very fortunate to have a key. When I got to the bottom of the road, the surf looked as I thought it would. Pretty small but clean. I put on my wetsuit, pulled the Moby out of the back of my truck, closed the hatch. I looked out at the lineup and did a double take. A solid 6-foot set. Fu#k! Well, it was the only board I had with me, so off I went.My first wave, I was trippen, because I thought I would really have to pull back on the reigns. No. The board took off like a bat out of hell. It had no top end. After a few more waves, I was completely sold on this design and the versatility it had.It’s been very popular, some of my good friends had them. What was interesting, their sons, some of the best LJ reef surfers, tried them and didn’t want to give them back. They ordered duplicates. Not smaller, leaner versions. The same boards. They actually rode them on the bigger days.Because of it’s size, it is a great board for beginners and is a great alternative to a longboard. As it turns out, it’s good for all ranges of ability and surf. The entry rocker is relaxed which helps with the paddle. The exit rocker is on the average plus side which helps with turning and fits into the waves better. The fuller outline provides lots of surface area: glide and speed. The rails are fuller but somewhat angular with a lower apex providing lift and control.I were relegated to one board, this would be it. Fun.Dimensions: 7.0 x 22 x 2.75 - 48,6 Liter4 Fin Ouad Setup, fitting Futures FinsContent: Board without finsTEC - TORQ EPOXY COMPOSITETorq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.The result is light but very strong board, with good flex characteristics and as with all torq's excellent value. Rusty TQ-TC-RU-MF-0700
Not in stock
Surfboard RUSTY TEC Moby Fish 6.8 Quad
€835.00*
In 2005 I made my first 4 fin Moby. I really liked the feel of this ride. I had ridden it in surf up to approximately 5 foot. One day I thought the surf was pretty small, so I took my Moby down to Blacks. Nothing else. I was very fortunate to have a key. When I got to the bottom of the road, the surf looked as I thought it would. Pretty small but clean. I put on my wetsuit, pulled the Moby out of the back of my truck, closed the hatch. I looked out at the lineup and did a double take. A solid 6-foot set. Fu#k! Well, it was the only board I had with me, so off I went.My first wave, I was trippen, because I thought I would really have to pull back on the reigns. No. The board took off like a bat out of hell. It had no top end. After a few more waves, I was completely sold on this design and the versatility it had.It’s been very popular, some of my good friends had them. What was interesting, their sons, some of the best LJ reef surfers, tried them and didn’t want to give them back. They ordered duplicates. Not smaller, leaner versions. The same boards. They actually rode them on the bigger days.Because of it’s size, it is a great board for beginners and is a great alternative to a longboard. As it turns out, it’s good for all ranges of ability and surf. The entry rocker is relaxed which helps with the paddle. The exit rocker is on the average plus side which helps with turning and fits into the waves better. The fuller outline provides lots of surface area: glide and speed. The rails are fuller but somewhat angular with a lower apex providing lift and control.I were relegated to one board, this would be it. Fun.Dimensions: 6.8 x 21,38 x 2.59 - 42,4 Liter4 Fin Ouad Setup, fitting Futures FinsContent: Board without finsTEC - TORQ EPOXY COMPOSITETorq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.The result is light but very strong board, with good flex characteristics and as with all torq's excellent value. Rusty TQ-TC-RU-MF-0608
Not in stock
Surfboard TORQ TEC BigBoy Fish 7.6
€739.00*
BIGBOY FishScope of delivery:: Board without FinsThis is a wolf in sheep’s clothing. The dark horse, charlatan, imposter. You think you’re looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde. On paper it’s a funboard and if you’re looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it’s perfect for you. But in the hands of a seasoned surfer it’ll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us “I was smiling so much I got sunburnt teeth!”. For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.Dimensions: 7’6 x 22 3/4” x 3 3/8” Volumen: 66,3 LiterTORQ EPOXY COMPOSITETorq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet. Torq TQ-TC-BF-0706
Not in stock
Surfboard TORQ TEC BigBoy Fish 7.2
€729.00*
BIGBOY FishScope of delivery:: Board without FinsThis is a wolf in sheep’s clothing. The dark horse, charlatan, imposter. You think you’re looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde. On paper it’s a funboard and if you’re looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it’s perfect for you. But in the hands of a seasoned surfer it’ll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us “I was smiling so much I got sunburnt teeth!”. For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.Dimensions: 7’2 x 22 1/2” x 3 1/4” Volumen: 60,3 Liter TORQ EPOXY COMPOSITETorq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet. Torq TQ-TC-BF-0702
Not in stock
Surfboard TORQ TEC BigBoy Fish 7.2 Rail Berry
€729.00*
BIGBOY FishScope of delivery:: Board without FinsThis is a wolf in sheep’s clothing. The dark horse, charlatan, imposter. You think you’re looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde. On paper it’s a funboard and if you’re looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it’s perfect for you. But in the hands of a seasoned surfer it’ll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us “I was smiling so much I got sunburnt teeth!”. For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.Dimensions: 7’2 x 22 1/2” x 3 1/4” Volumen: 60,3 Liter TORQ EPOXY COMPOSITETorq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet. Torq TQ-TC-BF-0702-R
Not in stock
Surfboard TORQ TEC BigBoy Fish 6.10
€719.00*
BIGBOY FishScope of delivery:: Board without FinsThis is a wolf in sheep’s clothing. The dark horse, charlatan, imposter. You think you’re looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde. On paper it’s a funboard and if you’re looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it’s perfect for you. But in the hands of a seasoned surfer it’ll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us “I was smiling so much I got sunburnt teeth!”. For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.Dimensions: 6’10 x 22 1/4” x 3 1/8” Volumen: 54,7 LiterTORQ EPOXY COMPOSITETorq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet. Torq TQ-TC-BF-0610
Not in stock
Surfboard TORQ TEC Twin Fish 6.10 Rail Teal
€709.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’10 x 22 1/4” x 3 1/8” - 54,8 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0610-R
1 available
Surfboard TORQ TEC Twin Fish 6.10
€689.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’10 x 22 1/4” x 3 1/8” - 54,8 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0610
4 available
Surfboard TORQ TEC Twin Fish 6.6 Rail Teal
€689.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’6 x 21 3/4” x 3” - 50 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0606-R
Not in stock
Surfboard TORQ TEC BigBoy Fish 6.6
€679.00*
BIGBOY FishScope of delivery:: Board without Fins This is a wolf in sheep’s clothing. The dark horse, charlatan, imposter. You think you’re looking at a funboard? Think again. This is a funboard on steroids. This is Jekyll and Hyde. On paper it’s a funboard and if you’re looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it’s perfect for you. But in the hands of a seasoned surfer it’ll come alive. Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us “I was smiling so much I got sunburnt teeth!”. For any big guy rippers out there, longboarders wanting a shorter board or intermediates, look no further.With 5 Futures fin boxes, the BigBoy can be ridden as Quad or Thruster.Dimensions: 6’6 x 21 3/4” x 3” Volumen: 48.7 LiterTORQ EPOXY COMPOSITETorq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.The all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response.Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet. Torq TQ-TC-BF-0606
1 available
Surfboard TORQ TEC Twin Fish 6.4 Rail Teal
€679.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’4 x 21 1/4” x 2 3/4” - 43,7 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0604-R
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 6.6 Sand Sale to authorized Channel Islands dealers only
€669.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerIn 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.Dimensions Volume6’6 x 21 7/8” x 2 7/8” 47,6 LiterContent: Board without FinsWith 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-S-0606
1 available
Surfboard CHANNEL ISLANDS X-lite PodMod 6.6 Graphi Sale to authorized Channel Islands dealers only
€669.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerIn 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.Dimensions Volume6’6 x 21 7/8” x 2 7/8” 47,6 LiterContent: Board without FinsWith 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-G-0606
2 available
Surfboard CHANNEL ISLANDS X-lite PodMod 6.6 white Sale to authorized Channel Islands dealers only
€669.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerIn 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.Dimensions Volume6’6 x 21 7/8” x 2 7/8” 47,6 LiterContent: Board without FinsWith 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-W-0606
1 available
Surfboard TORQ TEC Twin Fish 6.2 Rail Teal
€669.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’2 x 20 7/8” x 2 5/8” - 39,9 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0602-R
Not in stock
Surfboard TORQ TEC Summer Fish 6.2
€669.00*
Summer Fish A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.Dimensions: 6.2 x 22 1/2 x 2 13/16 45,0 ltrContent: Board without finsTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-SU-0602
4 available
Surfboard CHANNEL ISLANDS X-lite PodMod 6.6 blue Sale to authorized Channel Islands dealers only
€669.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerIn 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.Dimensions Volume6’6 x 21 7/8” x 2 7/8” 47,6 LiterContent: Board without FinsWith 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-B-0606
1 available
Surfboard TORQ TEC Twin Fish 6.0 Rail Teal
€659.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’0 x 20 1/2” x 2 1/2” - 36,2 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0600-R
4 available
Surfboard TORQ TEC Twin Fish 6.6
€659.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’6 x 21 3/4” x 3” - 50 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0606
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 6.2 White Sale to authorized Channel Islands dealers only
€659.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume6’2 x 21 3/8” x 2 3/4” 40,5 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-W-0602
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 6.2 blue Sale to authorized Channel Islands dealers only
€659.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume6’2 x 21 3/8” x 2 3/4” 40,5 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-B-0602
Not in stock
Surfboard TORQ TEC Summer Fish 6.0
€659.00*
Summer Fish A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.Dimensions: 6.0 x 22 1/4 x 2 3/4 41,7 ltrContent: Board without finsTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-SU-0600
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 6.2 sand Sale to authorized Channel Islands dealers only
€659.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume6’2 x 21 3/8” x 2 3/4” 40,5 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-S-0602
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 6.2 Graphi Sale to authorized Channel Islands dealers only
€659.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume6’2 x 21 3/8” x 2 3/4” 40,5 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-G-0602
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 5.10 wite Sale to authorized Channel Islands dealers only
€649.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume5’10 x 20 7/8” x 2 5/8” 35,7 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-W-0510
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 5.10 blue Sale to authorized Channel Islands dealers only
€649.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume5’10 x 20 7/8” x 2 5/8” 35,7 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-B-0510
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 5.10 blue Sale to authorized Channel Islands dealers only
€649.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume5’10 x 20 7/8” x 2 5/8” 35,7 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands tq-e-ci-bu-0510
1 available
Surfboard TORQ TEC Twin Fish 5.10 Rail Teal
€649.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.5’10 x 20 1/4” x 2 7/16” - 33,8 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0510-R
Not in stock
Surfboard TORQ TEC Summer Fish 5.10
€649.00*
Summer Fish A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.With 5 Futures fin boxes, the Summer Fish can be used as Quad or Thruster.Dimensions: 5.10 x 21 3/4 x 2 5/8 38,0 ltrContent: Board without finsTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-SU-0510
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 5.10 Graph Sale to authorized Channel Islands dealers only
€649.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume5’10 x 20 7/8” x 2 5/8” 35,7 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-G-0510
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 5.10 sand Sale to authorized Channel Islands dealers only
€649.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume5’10 x 20 7/8” x 2 5/8” 35,7 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-S-0510
Not in stock
Surfboard TORQ TEC Twin Fish 6.4
€649.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’4 x 21 1/4” x 2 3/4” - 43,7 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0604
3 available
Surfboard CHANNEL ISLANDS X-lite PodMod 5.6 white Sale to authorized Channel Islands dealers only
€639.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume5’6 x 20 3/8” x 2 1/2” 31,3 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands tq-e-ci-w-0506
Not in stock
Surfboard TORQ TEC Twin Fish 6.2
€639.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.6’2 x 20 7/8” x 2 5/8” - 39,9 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0602
Not in stock
Surfboard CHANNEL ISLANDS X-lite PodMod 5.6 Graphi Sale to authorized Channel Islands dealers only
€639.00*
POD MOD Fish - Al Merrick - Channel Islands BestsellerDimensions Volume5’6 x 20 3/8” x 2 1/2” 31,3 LiterLieferumfang: Board ohne Finnen In 2000 the original Pod rapidly became a global favorite, allowing surfers to drop six inches off their shortboards and revolutionize punting.The Pod Mod design is a heavily modified Pod, designed to be ridden even shorter and wider than the original, catering to the surfer that wants a little more volume forward to catch waves but doesn’t want to sacrifice performance. The tail has been widened for small wave glide, and the original single to double concave has been replaced with a flat entry to concave vee for quick rail to rail transitions.Experienced surfers ride this board 3”- 6” shorter than you are tall.With 5 Futures fin boxes, the Pod Mod can be ridden as Quad or Thruster.TORQ X-LITE TECHNOLOGYX-Lite is a brand new Epoxy technology developed specifically for performance boards. This is lighter, stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD. Channel Islands TQ-F-CI-P-G-0506
1 available
Surfboard TORQ TEC Twin Fish 5.8 Teal Rail
€639.00*
This modern Twin Fish is all about speed and flow.A wide nose, single concave and low entry rocker leads to a medium wide mid point and straight rail line to the tail, with a flat rocker throughout. This combination of features makes the Fish the fastest board in our line, perfect for highline speed runs on down the line waves.To keep all the speed under control there is a deep double concave vee under the tail and quad fin set-up which allows fluid and fast directional changes. The deep swallow tail naturally carves through turns to keep the wide tail from sliding out.Great for average to good waves of 2-4ft.5’8 x 20” x 2 3/8” - 31,5 LitContent: Board without fins2 Futures FinboxesTORQ EPOXY COMPOSITEThe all new torq TEC lay-up offers the same incredible durability with a new and improved flex pattern. The overall deck and rail lay-up is reduced to a 6oz and 4oz layer which allows the board much greater freedom of twist and flex. A 6oz deck patch ensures the same level of impact resistance, while the addition of a carbon filament stringer adds incredible longitudinal strength and response. Torq TQ-TC-FT-0508-R